Integra DRX-7.1 Скачать руководство пользователя

Страница: 41 / 116

> Specifications

> Advanced Setup

> Listening Modes

> Network Functions

> Basic Manual

Troubleshooting

Supplementary Information, etc.

Playback from USB storage

devices

■

Displaying the artist name, album name, and

artwork for WAV format

When playing WAV format music files, you can display

information such as the artist name, album name, and art

work on the display of the main unit, on the TV screen, and

in the screen of the Integra Control Pro app.

To enable display, follow the folder structure and file

naming as shown in the diagram when saving music files.

The artwork is displayed by saving the .jpg files to be

displayed in the lowest folder. It may take some time for

the .jpg files to be displayed or they may not be displayed

at all if the volume of the data is large.

Folder 1

Folder 1-1

file 1-1

file 2-1

file 3-1

・

Folder 1-2

file 1-2

file 2-2

file 3-2

・

Artist name

Album name

.jpg file

■

USB Storage Device Requirements

•

This unit can use USB storage devices that comply with

the USB mass storage device class standard.

•

FAT16 or FAT32 file system format.

•

If the USB storage device has been partitioned, each

section will be treated as an independent device.

•

Up to 20,000 tracks per folder can be displayed, and

folders may be nested up to 16 levels deep.

•

USB hubs and USB storage devices with hub functions

are not supported. Do not connect these devices to the

unit.

•

USB storage devices with security function are not

supported on this unit.

•

If you connect a USB hard disk drive to the USB port of

the unit, we recommend that you use its AC adapter to

power it.

•

Media inserted to the USB card reader may not be

available in this function. Furthermore, depending on

the USB storage device, proper reading of the contents

may not be possible.

•

Our company accepts no responsibility whatsoever for

the loss or damage to data stored on a USB storage

device when that device is used with this unit. We

recommend that you back up your important music files

beforehand.

■

Supported Audio Formats

This unit supports the following music file formats. Note

that sound files that are protected by copyright cannot be

played on this unit.

MP3 (.mp3/.MP3)

•

Supported formats: MPEG-1/MPEG-2 Audio Layer 3

•

Supported sampling rates: 44.1 kHz, 48 kHz

•

Supported bitrates: Between 8 kbps and 320 kbps.

WMA (.wma/.WMA)

•

Supported sampling rates: 44.1 kHz, 48 kHz

•

Supported bitrates: Between 5 kbps and 320 kbps.

•

WMA Pro/Voice/WMA Lossless formats are not

supported

WAV (.wav/.WAV)

WAV files include uncompressed PCM digital audio.

•

Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

•

Quantization bit: 8 bit, 16 bit, 24 bit

AIFF (.aiff/.aif/.AIFF/.AIF)

AIFF files include uncompressed PCM digital audio.

•

Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

•

Quantization bit: 8 bit, 16 bit, 24 bit

AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/

.MP4/.3GP/.3G2)

•

Supported formats: MPEG-2/MPEG-4 Audio

•

Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz

•

Supported bitrates: Between 8 kbps and 320 kbps.

FLAC (.flac/.FLAC)

•

Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

•

Quantization bit: 8 bit, 16 bit, 24 bit

Apple Lossless (.m4a/.mp4/.M4A/.MP4)

•

Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

•

Quantization bit: 16 bit, 24 bit

DSD (.dsf/.dff/.DSF/.DFF)

•

Supported formats: DSF/DSDIFF

•

Supported sampling rates: 2.8 MHz, 5.6 MHz, 11.2 MHz

Dolby TrueHD (.vr/.mlp/.VR/.MLP)

•

Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

•

Variable bit-rate (VBR) files are supported. However,

playback times may not be displayed correctly.

•

This unit supports the gapless playback of the USB

storage device in the following conditions.

When playing WAV, FLAC and Apple Lossless, and

the same format, sampling frequency, channels and

quantization bit rate are played continuously.

Содержание DRX-7.1





















































































































Результаты поиска

Содержание DRX-7.1

Отзывы:

Похожие инструкции для DRX-7.1

Бренды по названию

Популярные бренды

Integra DRX-7.1, Основное руководство

Результаты поиска

Содержание DRX-7.1

Отзывы:

Похожие инструкции для DRX-7.1

Бренды по названию

Популярные бренды