19
Connecting the DPC-7.5
—Continued
With
(Remote Interactive) you can control your DPC-7.5
by using the remote controller supplied with your Onkyo or
Integra -compatible
AV
receiver.
Notes:
• Push the plugs in all the way to make a good connection.
• Use only
cables for
connections.
•
To use
you must also make an analog RCA/phono
connection between your DPC-7.5 and Integra/Onkyo
AV receiver, even if they are connected digitally.
• The DPC-7.5 has two
connectors. You can connect
either one to your Integra/Onkyo AV receiver. The other
connector is for connecting additional
-compatible
components.
• Connect the DPC-7.5’s
connector to only Integra/
Onkyo AV components. Connecting to other manufac-
turer’s AV components may cause them to malfunction.
• Do not use a power cord other than the one supplied with
the DPC-7.5. The power cord supplied is designed for use
with the DPC-7.5 and should not be used with any other
device.
• Never have the power cord disconnected from the DPC-7.5
while the other end is plugged into the wall outlet. Doing
so may cause an electric shock. Always connect by plug-
ging into the wall outlet last and disconnect by unplugging
from the wall outlet first.
Connecting -compatible
AV
Components
MODEL NO.
DPC-7.5
DVD CHANGER
S VIDEO
VIDEO
REMOTE
CONTROL
L
R
DIGITAL
OPTICAL
COAXIAL
ANALOG
COMPONENT
2
COMPONENT
1
OUT
IN
PB
Y
PR
PB
Y
PR
IR
VIDEO OUTPUT
RS
232
AUDIO OUTPUT
AUDIO OUTPUT
Integra/Onkyo AV receiver
REMOTE
CONTROL
L
R
ANALOG
INPUT
DIGITAL IN
OPTICAL
cable
To use you
must make an
analog RCA/phono
connection between
the DPC-7.5 and the
other component
even if they are
connected digitally.
OPTICAL
COAXIAL
DIGITAL
OPTICAL
COAXIAL
AUDIO OUTPUT
(Supplied)
L
R
ANALOG
AUDIO OUTPUT
REMOTE
CONTROL
Plug the supplied power cord into the AC
INLET
DPC-7.5
ANGER
AC INLET
DPC-7.5 DVD Changer Page 19 Tuesday, February 10, 2004 10:11 AM