14.02-14
OUTSTATION LAYOUT.
OUTSTATION LAYOUT.
2-Wire RS485 Serial Connections.
4-Wire RS422 Serial Connections.
4
6
3
9
5
Shimaden FP21
with RS422 option
4
6
3
9
5
Shimaden SR25/253
with RS422 option
25
24
23
22
21
Shimaden SR53/54
with RS422 option
5
4
3
2
1
Shimaden SR73A/74A
with RS422 option
To other INTECH MICRO Remote
Stations & Shimaden Controllers etc.
End of Data
Hi-way
Junction Box.
TWISTED
P
AIR
IN-2000-AI
Remote Station.
2100-AO
Remote Station.
IN-2000-DI
Remote Station.
2100-A
4
Remote Station.
21
20
23
22
36
35
38
37
70
71
72
73
74
2100-D
Remote Station.
70
71
72
73
74
IN-2000-DO
Remote Station.
26
25
28
27
21
22
1
Shimaden SD20
with RS485 option.
23
22
21
Shimaden SR53/54
with RS485 option.
3
2
1
Shimaden SR73A/74A
with RS485 option.
To other INTECH MICRO
Remote Stations &
Shimaden Controllers etc.
Resistor = 1k .
2100-A
16
Remote Station.
2100-A
4
Remote Station.
2100-AO
Remote Station.
70
71
74
70
71
74
70
71
74
Notes:
(i) RS485 can only be used with software release Ver. 4.02 onwards.
(ii) RS485 Data Hi-way is not compatible with RS422 Data Hi-way devices
such as IN-2000-AI, IN-2000-AO, IN-2000-DI, IN-2000-DO, FP21,
SR25, etc. Use a 2100-4S to interface an RS485 Data Hi-way to an
existing RS422 Data Hi-way
RS232:
2100-IS convertor is not required to connect the 2100-232
directly to a PC. Use the RS232 kit to connect the 2100-232
directly to a PC. The PC requires one RS232 port per 2100.
RS485:
If the outstation is using RS485, it cannot be connected to the same
data hi-way as an outstations using RS422. In the ‘programming’
box, set the ‘TX delay’ box to 20. Set the Dip switches on the
2100-IS and the jumpers on the 2100 for RS485 operation.
24
23
21
22
1
Shimaden SD20
with RS422 option
3
9
5
Shimaden SR253
with RS485 option.
2100-A
16
Remote Station.
70
71
72
73
74
IMPORTANT:
(i) All cables must be
screened.
(ii) All screens must
be connected
together.
(iii) The screen must
not be earthed at
any point.
IMPORTANT:
(i) All cables must be
screened.
(ii) All screens must
be connected
together.
(iii) The screen must
not be earthed at
any point.
2100-D
Remote Station.
70
71
74
70
71
72
73
74
DO NOT GUESS TX OR RX CONNECTIONS. FOLLOW THE TERMINAL NUMBERS IN THE SERIAL CONNECTION DIAGRAMS EXACTLY.
-
+
SG
Shimaden SR80 Series
with RS485 option.
Shimaden SR90 Series
with RS485 option.
SR82
18
17
16
SR83
25
24
23
SR84
22
21
1
-
+
SG
SR91
12
11
1
SR92,93,94
3
2
1
Resistor = 1k .
TWISTED
P
AIR
TWISTED
P
AIR
TWISTED
P
AIR
TWISTED
P
AIR
TWISTED
P
AIR
End of Data
Hi-way
Junction Box.
74 71 70
Terminal Numbers
COM
TX+ TX-
RS485 DATA HI-WAY.
CABLE POLARITY
MUST BE OBSERVED
RS422 DATA HI-WAY.
CABLE POLARITY
MUST BE OBSERVED
RS485 DATA HI-WAY.
CABLE POLARITY
MUST BE OBSERVED
RS422 DATA HI-WAY.
CABLE POLARITY
MUST BE OBSERVED
74 73 72 71 70
Terminal Numbers
com
RX+ RX- TX+ TX-
74 71 70
COM
TX+ TX-
74 73 72 71 70
com
RX+ RX- TX+ TX-
2100-NET
10/100 Ethernet to
RS422/485 Converter.
COMPUTER
PLC
2100-IS/NS
RS232 to RS422/485
Converter/Isolator.
2100-NET
10/100 Ethernet to
RS422/485 Converter.
RS232
ETHERNET
COMPUTER
PLC
2100-IS/NS
RS232 to RS422/485
Converter/Isolator.
The 2100-IS and 2100-NET are
designed to connect to seperate data
hi-ways and connect to the same
SCADA PC as per the diagram.
RS232
ETHERNET
The 2100-IS and 2100-NET are
designed to connect to seperate data
hi-ways and connect to the same
SCADA PC as per the diagram.
70
71
72
73
74
2100-4S RS422
to RS485 Converter
70
71
74
RS485
Only one converter to be
connected to any one data hiway.
OR
Only one converter to be
connected to any one data hiway.
OR
