Intab Tinytag Connect, Руководство пользователя

Страница: 67 / 72

65
4.3 LED FLASH PATTERNS
4.3 LED Flash Patterns
Ethernet Radio Receivers and LAN data loggers have two status LEDs; one to show the status of the
device’s Ethernet connection (yellow/blue) and the second to show the status of the unit (green/red).
Action LED Status/Operation
n/a No Indicators Device is powered off
n/a Red flash every 4 The device is powered on
seconds and has a problem.
Either:
a) Battery is Low.
b) An alarm indicator is
signalled.
Check the nature of the
problem using Tinytag
Explorer.
n/a Green flash every 4 seconds The device is powered on,
and does not have any
problems.
Press and briefly hold the Green indicator shows for one The device has been
mute button. second. It then briefly flashes switched on.
green then red.
Press and hold the mute Red indicator shows for one The device has been
button for 3 seconds. second. switched off.
n/a Yellow indicator on constantly The device is being
powered from its Ethernet
connection, but no
communications have been
established.
n/a Blue (flickering) Ethernet communications
are established and
on-going
Note that the yellow and blue LEDs cannot be on at the same time. If the blue LED is on
(or flickering) then PoE power must be available.