Inta Hiper Xi45 INDIRECT HIU 45DHW/10HTG, Инструкция по эксплуатации

Страница: 8 / 28

PRIOR TO INSTALLATION, please note.
•
Wall fixing bolts are to be provided by the installer and be suitable to bear the
weight of the HIU and fix securely to the wall.
•
The position of the HIU should be in a location where pipe runs to DHW be kept
to a minimum. The HIU is not suitable for DHW circuits which require a
secondary circulation pump.
•
Ensure sufficient access to the HIU and its components for future maintenance.
•
Have you a copy of Installer Level parameters? (for settings other than Factory)
Steel WALL BRACKET is provided with the HIU or
Primary First Fix Kit .
This can be sent with the HIU or in advance
OPTIONAL
For First Fix Pipe installation using the Hiper First
Fix JIG—see accessories Stage 4.1 of Section 4.
Fitting the Wall mounting BRACKET
Align the bracket for level VERTICAL installation
of the HIU
Fix the Bracket SECURELY to the wall using
appropriate fixings (supplied and selected by the
installer)
Remove the FRONT COVER and store carefully until
installation is complete.
FRONT COVER is removed by removing the screws
and sliding the FRONT COVER forward along the
channels that align it to the HIU FRAME.
Unpack carefully and check contents.
Check that any accessories required are ready to use. (Stage 7 of Section 4)
Pipework behind the HIU? See Standoff Brackets (Stage 5 of Section 4)
90
0
LIFT the two BRACKETS as shown here that
are cut into the HIU frame into the vertical
position.
Hang the HIU onto the two INNER CLASPS on
the Wall Bracket.
SECTION 4 - Installation and Assembly instructions
Stage
1
Stage
2
Stage
3
09/17 E & OE