TwinLock
Assembly Instructions
Version 1.12
9
1.2.5. Arming Device: TwinAlarm
The arming device TwinAlarm is mounted inside the
safe and is used as a connecting link between the
terminal FlatControl (input unit) and the locks and a
burglary alarm system (BAS), as well as to connect a
serial printer/PCs, and as a distributor for the burglary
alarm system (bolt contacts, door contacts, resistance
monitoring, etc.).
Soldering terminals for the mounting of resistors for
resistance monitored lines are available. The inputs can be customized in various
ways, using jumpers.
In
TwinAlarm,
the electronic keys (chip cards) as well as the input signals of the
burglary alarm system are evaluated.
The TwinAlarm housing is protected against sabotage by the means of a tamper
switch and protection on all sides, and it is secured with a sealing adhesive label.
BAS Inputs:
BAS READY
Prevents the BAS from being armed
(customization by jumper and software).
DISARM BLOCK
prevents the BAS from being disarmed
(customization by jumper and software).
RELEASE
Prevents the unlocking of the locks
(customization by jumper and software).
ACKNOWLEDGEMENT
Evaluates the arming acknowledgement of the BAS
(customization by jumper and software).
Other Inputs:
NO TIMEOUT
Enables the interruption of the timer programs (weekly
programs, special days, blocking time), so that, for example,
persons locked into the safe may be freed during an active
timer program.
CENTRAL CONTACT
The central contact prevents the shutting of locks when the bolt
system is open.
