INSYS ADSL 1.0
Mounting
Disconnecting the power supply
The device is mounted to the DIN rail.
The power supply is connected and switched off.
1.
Disconnect the ground lead of the power supply from the terminal
"GND".
2.
Disconnect the plus pole of the power supply from the terminal for
the power supply.
The INSYS ADSL 1.0 is disconnected from the power supply.
Uninstalling the device from the DIN rail
How to uninstall the INSYS ADSL 1.0 from a DIN rail in a switch cabinet:
You will need a Phillips screwdriver with a 4.5 mm blade.
The power supply of the switch cabinet is switched off and secured against
being switched on accidentally.
All cables at the INSYS ADSL 1.0 are disconnected.
1.
Insert the Philips screwdriver into the groove in the bottom of the
INSYS ADSL 1.0 as shown in the following figure.
25
