InStyler STRAIGHT UP M11566, Руководство пользователя

Страница: 15 / 68

15
GETTING STARTED
Prior to use, run a comb or brush through clean, dry hair to
make hair smooth and tangle free. Plug into an electrical outlet
and SLIDE the Power Button until the LED light is illuminated.
STRAIGHT UP will always turn on at 215 °C.
OPERATING INSTRUCTIONS AND TIPS
Turn on the InStyler Straight Up before styling for approx.
3 minutes to allow it to warm up and reach the maximum
temperature.
•
Separate a section of hair to be straightened.
• Position your STRAIGHT UP close to the roots of the
section of hair with the bristles facing away from the face.
• Hold the hair firmly and brush from the roots to the
ends, making sure the section of hair is secured in the
bristles. Using your other hand, hold the ends of your hair,
pulling them down to add tension to the section that you
are styling. The key is to keep tension in the hair as you
brush.
• Repeat steps 1-3 for each section of hair until all hair
has been straightened. To achieve the best results, move
slowly down each section of hair.
• When the desired look has been achieved, use the sliding
switch to turn off your STRAIGHT UP.
• Complete your look with a spritz of styling spray to give
your hair that sleek finished look.
MAINTENANCE
The STRAIGHT UP requires minimal maintenance. If cleaning is
necessary, unplug the unit from the power source and wait for the
unit to cool completely. Wipe the exterior of the unit with a cloth. Do
not attempt repairs. If a repair is required, unplug the unit, allow it to
cool, and return it for repair to an authorized service representative.
STORAGE
To store your STRAIGHT UP, unplug and wait for it to cool
completely. Store out of the reach of children and in a safe and
dry location. Do not pull on cord at electrical source or wrap cord
around the unit.
M11566_Instyler_StraightUp_Manual_20161201_DR.indd 15 15.12.16 08:15