INSTROTECH 6004BW Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 58

INSTROTECH 6004BW Скачать руководство пользователя страница 33

To view or alter the security level press Enter when the SECURITY LEVEL function block is
displayed. All values can be inserted or altered when highlighted. Do not press enter until all
required changes to the entire block are completed.

The Security Levels set access to the various menus. The Operator's menu can always be
viewed in Security Level 0 but not altered. In Security Level 1 the Operator's menu can be
viewed/activated, with password can enter service menu, with link can alter. In Security Level 2
the Operator's and Service Menu can be viewed or calibrated without a password but will still
require the hardlock to be in place on the back of the display PCB for activation.

Level 1: View and activate Operators' Menu. Service Menu can be viewed WITHOUT
PASSWORD and activated (calibrated) with hardlock link .

Level 2: View and activate Operators' Menu. Service menu can be viewed WITH PASSWORD
and activated (calibrated) with hardlock link.

Level 3: View Operators' Menu only. Service menu can be viewed WITH PASSWORD and
activated (calibrated) with hardlock link.

When the entire block is ready press Enter . This will set the whole block and move on to the
next block, in this case PRECALIBRATE.

Service Menu

Function Block Number 10
10.

- SECURITY LEVEL -

Page

32

«
...
31
32
33
34
35
...
»

Содержание 6004BW



























































Отзывы:

Нет отзывов