Instron 34FM-100, Руководство по предварительной установке

Страница: 60 / 76

Chapter: Lifting and handling
60 M10-17541-EN
Always follow the instructions provided with the shipping package. Contact Instron
®
if
you require any additional information or if any part of the shipment is damaged.
34FM-100 Packaging dimensions and weight
Instron recommends leaving the load frame in its packaging while moving it to its final
site location within your building.
Use the information in Table 15 on page 60 to verify that:
•
the packaged frame fits through all doorways and hallways leading to the final
location
•
all floors leading to the final location can support the weight of the packaged frame
Unpack floor model frames
Before moving the load frame, review the following sections:
•
“Site requirements” on page 26 .
•
“Right the frame from a prone position” on page 61
•
“Transport floor model frames” on page 66
1. Move the load frame, still in the shipping material, to its final location within your
building. Use a forklift (or crane) to transport the frame from the shipping dock to the
final location. Unpack the load frame after it has been moved to its final location.
2. Remove the shipping material, leaving the load frame fastened to the shipping skid.
Table 15. Packaged dimensions and weights
Configuration
Length mm
(in) Width mm (in)
Height
1
mm
(in)
Minimum
2
packaged
weight kg (lb)
Standard base 2692 (106) 1524 (60) 1143 (45) 1048.3 (2311)
Tall base 2921 (115) 1524 (60) 1143 (45) 1154.4 (2545)
1. This dimension is the maximum height possible. Depending on the contents, the packaging height may
be reduced.
2. This is the weight of the frame and packaging. It does not include the weight of any accessories that
may be included.