INSTEON KeypadLinc Dimmer User’s Guide
Page 12 of 39
3.
Cap the other TRAVELER house wire.
The other
TRAVELER wire, usually red, will not be used, so put a wire
nut on the end of it.
4.
Cap the red LOAD wire from the KeypadLinc Secondary.
Put a wire nut on the end of the
KeypadLinc Secondary’s LOAD wire to ensure that it won’t connect to anything.
5.
Connect the KeypadLinc Secondary’s NEUTRAL Wire.
Locate the group of NEUTRAL wires,
usually white, in the rear of the box. The old switch should not have been connected to the
NEUTRAL wires, but KeypadLinc Dimmer requires this connection in order to draw a small amount of
power for itself. Connect KeypadLinc Secondary’s white NEUTRAL wire to the other NEUTRAL wires
with a wire nut.
