![background image](http://html.mh-extra.com/html/insteon/2442-422/2442-422_owners-manual_2069910012.webp)
Page 12 of 16 2475DA2, 2442-422, 2442-522 Rev: 1/21/2014 8:31 AM
Mechanical
Mounting
Behind switch or outlet, or above light fixture in a single-gang
electrical box
Wires
0-10V Control (Gray wire)
Analog - 0-10V Control (purple wire)
Line
Neutral
Load 1
Load 2
Set Button
1
Beeper
Yes
Beep on button press
Optional (off by default)
LED
1, green/red
Dimensions
171mm (wide), 30mm (high), 35mm (deep)
6.75-in. (wide), 1.2-in. (high), 1.4-in. (deep)
Weight
5.1 ounces
Operating Environment
Indoors
Operating Temperature Range
32º F – 104º F (0º C – 40º C)
Operating Humidity Range
0-90% relative humidity, non-condensing
Storage conditions
-4º F to +158º F (-20º C – 70º C)
Case Color
White
Plastic
UV stabilized polycarbonate
Electrical
Voltage
100-277VAC ±10%
Frequency
50Hz/60Hz
Maximum Load
0-10VDC for connection to dimmable ballast
Load 1; 100 to 277VAC / 5Amps
Load 2; 100 to 277VAC / 5Amps
Hardwired remote control
RJ-10 Mini-modular jack four conductor
Hardwire port wiring
Pin 4
(Left side)
Pin 3
Pin 2
Pin 1
(Right side)
Ground
Group 1 - 2
Group 3-4
12-15VDC
Hardwire port triggering
Group 1: triggers when switch between Pin 3 & 4 is closed
Group 2: triggers when switch between Pin 3 & 4 is opened
Group 3: triggers when switch between Pin 2 & 4 is closed
Group 4: triggers when switch between Pin 2 & 4 is opened
Retains all settings without power
Yes, saved in non-volatile EEPROM
Load Type(s)
Wired in ballasted dimming and non-dimming lighting loads
Retains all settings without power
Yes, saved in Non-volatile EEPROM
Standby power consumption
< 1 watt
Safety Approved
ETL, CE, C-Tick