52
| [email protected] | 1-800-828-7280
Troubleshooting
Problem
Possible reason
Try this
The display
remains
blank after
connecting the
power cord.
Bad power connection or no
power.
Check outlet to make sure it is powered.
Inspect power cord for damage. If you notice damage,
contact
Customer Care
.
The multiooker’s electrical fuse
has blown.
Contact
Customer Care
.
Error code
appears on the
display and the
multicooker
beeps
continuously.
C1
C3
C4
C6
Faulty sensor.
Contact
Customer Care
.
C7
Heat element has failed.
Contact
Customer Care
.
Not enough liquid.
Add thin, water-based liquid to the inner pot according to
its size.
8 Qt: 2 cups (500 mL / (~16 oz)
C8
Incorrect inner pot is
used.
Only use a stainless-steel Pro Series inner pot with easy grip
handles with the Pro Plus.
C10
Wifi error.
Contact
Customer Care
.
Lid
The lid is not in the
correct position for the
selected program.
Open and close the lid.
Do not use a lid when using Sauté.
Alt
The target temperature
for safe canning was
not reached.
Touch
Cancel
. Check that all seals are clean, positioned
correctly, and undamaged. Make sure that you have at
least 1 cup of water in the inner pot before restarting.
Do not pressure can at altitudes above 2000 m (6600 ft).
Refer to the
USDA’s Complete Guide to Home Canning
for procedures and limitations.
Food
burn
High temperature
was detected at the
bottom of the inner
pot; the multicooker
automatically reduces
the temperature to
avoid overheating.
Starch deposits at the bottom of the inner pot may have
blocked heat dissipation.
Turn the multicooker off, release pressure and inspect the
bottom of the inner pot.
PrSE
Pressure has
accumulated during a
non-pressure cooking
Smart Program.
Touch
Cancel
and Quick Release pressure.
Any other servicing must be performed by an authorized representative.
112-0124-01-0101_IB_Pro-Plus_Interim_GSG_FINAL.indd 52
112-0124-01-0101_IB_Pro-Plus_Interim_GSG_FINAL.indd 52
7/9/21 1:58 PM
7/9/21 1:58 PM
