53
Troubleshooting
Contact Customer Care:
1-800-828-7280
[email protected]
instantpot.com/#Chat
Problem
Possible Reason
Solution
Difficulty
closing lid
Sealing ring not properly installed
Reposition sealing ring, ensure it is snug
behind sealing ring rack.
Float valve in the popped-up position
Gently press the float valve downward with
a long utensil.
Contents in cooker are still hot
Turn the steam release handle to the
Venting
position, then lower lid onto
cooker base slowly, allowing heat to
dissipate.
Difficulty
opening lid
Pressure inside the cooker
Release pressure according to recipe;
only open lid after float valve has dropped
down.
Float valve stuck at the popped-up
position due to food debris or residue
Ensure steam is completely released by
quick releasing pressure, then press float
valve gently with a long utensil.
Open lid cautiously and thoroughly clean
float valve, surrounding area, and lid before
next use.
WARNING
Contents may be under pressure; to avoid scalding injury, do not
attempt to force lid open.
Inner pot is
stuck to lid
when cooker is
opened
Cooling of inner pot may create
suction, causing inner pot to adhere to
the lid
To release the vacuum, turn the steam
release handle to the
Venting
position to
release any pressure.
Steam leaks
from side of lid
No sealing ring in lid
Install sealing ring.
Sealing ring damaged or not properly
installed
Replace sealing ring.
Food debris attached to sealing ring
Remove sealing ring and clean thoroughly.
Lid not closed properly
Open, then close lid.
Sealing ring rack is warped or off-
centre
Remove sealing ring from lid, check sealing
ring rack for bends or warps. Contact
.
Inner pot rim may be misshapen
Check for deformation and contact
.