manualshive.com logo in svg

Inspur Yingxin NF5280M2, Руководство пользователя, Страница: 51 / 64

Поделиться
Скачать
Inspur Yingxin NF5280M2 Скачать руководство пользователя страница 51

45

con

fi

 gured.

6.3.2 The disk size is not consistent with the local disk capacity when Ruijie is 

6.3.2 The disk size is not consistent with the local disk capacity when Ruijie is 

used to boot system installation. 

used to boot system installation. 

Please check whether the machine connects external mobile devices (USB 

devices, external disk arrays, tape libraries, etc.). If the server connects USB, USB 
dongle, mobile hard disks and other USB devices, please remove them and then install 
the system; if the server connects storage devices, first disconnect them, then install 
with Ruijie installation system, otherwise it will result in abnormal storage arrays and 
data loss.

6.3.3 After  Ruijie  boot  configuration  completed  and  system  disk  input,  the 

6.3.3 After Ruijie boot configuration completed and system disk input, the 

machine reboot automatically and repeatedly 

machine reboot automatically and repeatedly 

1. Ruijie server kit CD is developed based on an authorized CD system contents 

framework. If your CD is an all-in-one system CD, please use a single system CD to install.

2. When Ruijie-boot configuration completes, please operate according to Ruijie's 

guide prompts. Please do not insert system CD into CD-ROM without prompts;once the 
system prompts the CD is inside, the system will complete the installation automatically and 
please do not manually disrupt the process in case it result in abnormal system installation.

6.3.4 Losing the machine-attached Ruijie server suite and System Driver program CD

6.3.4 Losing the machine-attached Ruijie server suite and System Driver program CD
Please visit the Inspur’s official website and download the correct version 

corresponding with your machine model.

1. Download Ruijie server kit from: 
http://www.inspur.com/downloads/channel_home/Downloads_sv_1.asp
2. Download Inspur system Driver from:
http://www.inspur.com/downloads/channel_home/Downloads_sv.asp

6.4 Additional notes

6.4 Additional notes

1. This server does not support system dormant function.

1. This server does not support system dormant function.
2. In order to guarantee the liability of the system, it is suggested that you use the 

2. In order to guarantee the liability of the system, it is suggested that you use the 

component of the relevant model authenticated by us when expanding and equipping 

component of the relevant model authenticated by us when expanding and equipping 
components.

components.

3. Please guarantee the fine electricity utilization environment of the server, 

3. Please guarantee the fine electricity utilization environment of the server, 

normal voltage input and earth-connecting condition and temperature and humidity and 

normal voltage input and earth-connecting condition and temperature and humidity and 
so on within the normal range.

so on within the normal range.

4. For special needs, when transferring the server, pay attention to avoid the 

4. For special needs, when transferring the server, pay attention to avoid the 

Chapter Six Common Problems and Trouble-shooting

Chapter Six Common Problems and Trouble-shooting

Содержание Yingxin NF5280M2

































































Отзывы:

Нет отзывов