29
patch program independently).
●
Please select corresponding driver to the version of made or installed system
according to the version of the installed operating system.
5.2.2 Installation steps
5.2.2 Installation steps
1. Connect USB floppy or Inspur driving U disk to the USB interface of the
server, power up to start the server, and put the installation CD of Windows Server
2003 into CD-ROM and select to boot from CD.
2. Press any key when the system presents ‘Press any key to boot from CD’ and
the system will start Windows installation program from CD.
3. When the screen shows ‘Press F6 if you need to install a third party SCSI or
RAID driver...’ please press F6 key.
When the system displays ‘Setup could not determine the type of one or more
mass storage…’, press ‘S’ key. Insert ‘8708 SAS RAID card driving
fl
oppy’, and press
Enter to continue. Then select the corresponding version of operating system driver ‘LSI
Logic MegaRAID SAS RAID Controller Driver (Server 2003 32-bit)’ to the controller,
and press Enter to continue;
After the driver is loaded, press Enter key to continue the installation according to
the screen prompts.
4. The system displays ‘Welcome to Setup’, the installation program of this part
prepares to operate Microsoft (R) Windows (R) on your computer.
⊙
To set up Windows now, press ENTER.
⊙
To repair a Windows installation using Recovery Console, press R.
⊙
To quit Setup without installing Windows, press F3.
Here, we default it is the
fi
rst installation, so press <Enter> key to continue the
installation.
5. The system displays Windows Licensing Agreement, the user can read the
licensing agreement by pressing <Page Down> key, and after
fi
nishing the reading or
not reading the agreement, you can directly press [F8] key to accept the agreement.
6. The system displays the existing disk partition and unallocated space on the
computer, and you may select the items in the list with the up and down arrows.
⊙
To set up Windows on the selected item, press ENTER.
⊙
To create a partition in the unpartitioned space, press C.
⊙
To delete the selected partition, press D.
Chapter Five Installation of the Operating system
Chapter Five Installation of the Operating system