background image

6

Chapter Two Product Introduction

Chapter Two Product Introduction

Chapter Two Product Introduction

Chapter Two Product Introduction

2.1 Server Technical Speci

fi

 cation

2.1 Server Technical Speci

fi

 cation

Processor

Processor

Processor type

Two Intel® Xeon 55xx

,

56xx series CPU (Up to two pieces 95w).

Interface

Two 1366 pin slot.

Chipset

Chipset

Chipset type

IOH 5520 plus ICH10R chipset.

Memory

Memory

Memory type

DDR3 Unbuffered/ECC Registered memory.

RAM Slot Number

18

RAM Capacity

Up to 144GB(8GB per).

I/O Interface

I/O Interface

USB Interface

Four rear USB interfaces.
Two front USB interfaces.

Serial Interface

One rear serial interface.

Network Interface

Two gigabit Network card interfaces and one management interface.

Display Interface

One VGA interface.

UID  interface

One UID (blue) and UID button.

Display controller

Display controller

Controller type

Main board integrated AST2050 display controller.

Video Memory

8MB video memory.

SAS Back board

SAS Back board

SAS2.0 back board

Applicable to hot-plug SAS/SATA hard disk.

Integrated hard disk controller

Integrated hard disk controller

SATA controller

Main board integrated SATA controller, applicable to six pieces hot-
plug SATA hard disk at max, applicable to HostRAID 0/1/5/10.

Network card

Network card

Network controller

Integrated two Intel 82576EB Gigabit Network cards.

Management chip

Management chip

Management chip

Integrated Aspeed 2050 chip, applicable to BMC and KVM function.

Содержание Yingxin NF5280M2

































































Отзывы: