Chapter 4 Operating System Installation
35
cannot be successful.
12. After logging in the system, select “Administration” -> “Server Manager
Properties” on the top right of the menu bar in the “Server Manager” screen, in the pop-
up properties window, select “Does not start automatically when logging in “ and then
click [Yes] and close the server manager interface.
4.1.3 Install Driver
1.
Install chipset driver
(1) Insert Inspur driver CD into CD-ROM, click the blue dolphin icon under
the installation or operation procedure item in the pop-up autoplay interface after
disk running, and input the navigation No. on the driver CD set in the navigation No.
verification interface and click <OK> to enter the installation interface automatically;
(2) In “Select OS” column, select Windows 2012;
(3) In “Select Hardware” column, select chipset patch;
(4) Click <Next> to start the installation;
(5) Enter the interface of “Welcome to the Setup Program” and click <Next> to
continue the installation;
(6) Enter the interface of “License Agreement”, and select <Yes> to continue the
installation;
(7) Enter the interface of “Readme File Information”, and click <Next> to
continue the installation;
(8) The installation program begins to install; and click <Next> according to the
prompts;
(9) Complete the installation, click <Finish> according to the prompts, take out
the driver CD and restart the system.
2. Install network card driver
After installation of the chipset driver, do not take out the Inspur driver CD, but
continue the installation of network card driver.
(1) In the “Select OS” column, select Windows 2012;
(2) In the “Select Hardware” column, select NIC driver;
(3) Click <Next> to start the installation;
(4) Enter the interface of welcome to use, click <Next> to continue;
(5) Enter the interface of “License Agreement”, select “I accept the terms in the
license agreement” and then click <Next> to continue;
