Chapter 3 System Setup
31
and the following jumper state is the default setting:
Jumper name Function description Jumper function
J6
CMOS jumper
Pin 1-2 short circuit is in normal state (default)
Pin 2-3 short circuit is in CMOS cleared state
1. You must shut down the system and cut off power supply when clearing the
CMOS and need to keep for 5 seconds after short circuiting pin 2-3; then re-short
circuit pin1 and pin 2 of J17 jumper to restore to the original state.
2. After completing this operation, please install the upper panel.
