Chapter 3 System Setup
30
default optimization settings will be loaded; this operation will not exit BIOS setup.
The menu function can be achieved by using [F9].
● Load Custom Defaults
Select this option and press [enter] key, in the pop-up prompt, select [Yes], saved
user default setting value will be loaded.
● Save Custom Defaults
Select this option and press [enter] key, in the pop-up prompt, select [Yes], the
current setting value of all BIOS options will be saved as user default options.
● Discard Changes
Select this option and press [enter] key, in the pop-up prompt, select [Yes],
modifications in the BIOS setting will be given up; this operation will not exit BIOS
setup.
3.2 Clear CMOS
Take out the basic IO module
If the following operations are needed, please get the authorization of Inspur. Take
out the basic IO module according to the following methods:
1. Power off the system (turn off the AC power);
2. Press the plastic key of basic IO module handle on the back of the chassis. Open
the module handle.
3. Hold the module handle and pull afterwards, take out the module from the
chassis.
Clear CMOS
The following figure shows the Clear CMOS jumper position in the IO Riser card,
