Inspur NF5486M5, Руководство пользователя

Страница: 12 / 142

6
l
3.5×106 configuration (e.g. full configuration)
The server supports 106 3.5-inch SATA hard drives, and the appearance is shown below.
2.2 Features and Specifications
Technical specifications
Model
NF5486M5
Hardware features
Controller
One controller and dual CPUs, do not support hot swap
Host Standard 4U rack server, which can be placed in a 1.2m rack
Processor
Supports one or two Intel ® Xeon®3100/4100/5100/6100/8100 series
processor(s):
Supports up to 22 cores (2.1GHz)
Maximum frequency:3.6GHz (4cores)
Two UPI interconnecting links, up to 10.4GT/s per link
Maximum L3 cache of single core: 1.375MB
Maximum thermal design power: 140W
Chipset Intel C622
Memory
Supports up to 16 memories. Each processor supports 6 memory channels,
each channel supports up to 2 memory slots. The maximum memory
speed is up to 2666MT/s. RDIMM and LRDIMM are supported. Memory
protection supports ECC, memory mirroring, and memory level protection.
System maximum cache 768GB
USB port supported by each
controller
TwoUSB3.0 ports
Storage
1063.5-inchSATA 7.2KRPM He HDDs, supporting the mix of hard drives of
different manufacturers
M.2 storage Supports one SATA M.2, used to install the operating system
I/O expansion slot
Supports up to one standard PCIe slot, one OCP card slot (connector A),
and one PHY card slot (connector C)
PCIe expansion supports both free-tool design and screw fixation mode
PSU 2000W, PSU 1+1 redundancy, 200V-240V, 47Hz-63Hz, supporting hot swap
Fan
Eight 6076birotor fans and three 4056 birotor fans, supporting hot swap
and N+1 redundancy
System management
Integrates 1 independent 1000Mbps network interface for remote
management