Inspur NF5288M5 Скачать руководство пользователя | Manualshive

Страница: 29 / 114

background image

23

Setup

information, refer to the option documentation. For server-specific information, refer to
“Hardware options installation”.

5.5 Installing the Server into the Rack

CAUTION:

Always plan the rack installation so that the heaviest item is on the bottom of the

rack. Install the heaviest item first, and continue to populate the rack from the bottom to the top.

1.

Install the server and cable management arm into the rack. For more information, see the

installation instructions included with the 2U Slide Rail System.

2.

Connect peripheral devices to the server. For connector identification information, see

“Rear panel components” in this guide.

WARNING:

To reduce the risk of electric shock, fire, or damage to the equipment, do not

plug telephone or telecommunications connectors into RJ-45 connectors.

3.

Connect the power cord to the rear of the server.

4.

Connect the power cord to the AC power source.

WARNING:

To reduce the risk of electric shock or damage to the equipment:

• Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at
all times.
• Unplug the power cord from the power supply to disconnect power to the equipment.
• Do not route the power cord where it can be walked on or pinched by items placed against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord

extends from the server.

5.6 Installing the Operating System

To operate properly, the server must have a supported operating system installed. For the
latest information on supported operating systems, refer to the Inspur website (http://www.
inspur.com/eportal/ui?pageId=2317460).
To install the operating system on the server, you can download from the official website directly.

«
...
27
28
29
30
31
...
»

Содержание NF5288M5



















































































































Отзывы:

Нет отзывов

Похожие инструкции для NF5288M5

Бренд: DATA FROM SKY Страницы: 40

Бренд: ADLINK Technology Страницы: 76

Бренд: Alienware Страницы: 21

Бренд: WinSystems Страницы: 53

Бренд: Altair Страницы: 35

Бренд: Warner Communications Страницы: 50

Бренд: Avid Technology Страницы: 19

PCV-J200 - Vaio Desktop Computer

Бренд: Sony Страницы: 1

PCV-J120 - Vaio Desktop Computer

Бренд: Sony Страницы: 1

PCV-J100 - Vaio Desktop Computer

Бренд: Sony Страницы: 1

PCV-J120 - Vaio Desktop Computer

Бренд: Sony Страницы: 24

PCV-J200 - Vaio Desktop Computer

Бренд: Sony Страницы: 29

PCV-J150 - Vaio Desktop Computer

Бренд: Sony Страницы: 27

PCV-L400 - Vaio Slimtop Computer

Бренд: Sony Страницы: 35

PCV-E314DS - Vaio Digital Studio Desktop Computer

Бренд: Sony Страницы: 33

Бренд: Sony Страницы: 63

PCV-L620 - Vaio Slimtop Computer

Бренд: Sony Страницы: 104

PCV-J200 - Vaio Desktop Computer

Бренд: Sony Страницы: 102

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды