Inspur AS500H, Руководство пользователя

Страница: 38 / 56

Chapter XII Add a Storage Array
1. Select Tools>>Automatic Discovery from enterprise management window.
2. Click Ok to start auto search, this operation will search all storage arrays in local LAN,
which may need several minutes or longer time. If no storage array is found, the reason may be
network setting of storage array does not belong to local LAN, in this case, it is required to add a
storage array manually.
3. If not storage array is found via auto search, select Add New Storage Array-Manual in
enterprise management window, to add a storage array manually, the interface is as shown in the
following figure,
Figure 12-1
4. Select a corresponding management, if it is an out-of-band management, input ip addresses
of two controllers (in IPv4 network, default management addresses of controller A and B are
192.168.128.101 and 192.168.128.102), if it is a in-band management, input hostname or ip
address of the agent host, click add, the added storage array will display in EMW window.