Insportline SPORTline EG-7820, Руководство пользователя

Страница: 6 / 41

HARDWARE IDENTIFICATION CHART
Unpack the box in a clear area. Use the List of Hardware below to check the contents of the hardware kit. This
chart is provided to help identify the hardware used in the assembly process. Place the washers, the end of bolts,
or screws on the circles to check for the correct diameter. Use the ruler to check the length of the bolts and
screws.
NOTICE: The length of all bolts and screws except those with flat heads is measured from below the head to
the end of the bolt or screw. Flat head bolts and screws are measured from the top of the head to the end of the
bolt or screw.
After unpacking the unit, you will notice that the package includes 2 bags of hardware (HARDWARE KIT A
and HARDWARE KIT B ).
Assembly’s Step 1, 4, 5, 6 : Using HARDWARE KIT A .
Assembly’s Step 2, 3, 7~15 : Using HARDWARE KIT B .
Note:
a) Please review below to know the content of each hardware kit (A and B)
b) Some small parts may have been pre-attached for shipping. If a part is not in the hardware bag, check to
see if it has been pre-assembled
HARDWARE KIT A Part No. and Description Q’TY
88 Lock Washer (M8) 4
92 Washer (8x38x2.0t) 4
100 Bolt (M5xp0.8x15mm) 16
101 Bolt (M5xp0.8x50mm) 2
113 Bolt (M8xp1.25x65mm)
115 Bolt (M10xp1.5x70mm)
4
2
6