background image

If the Buyer gives notice of a defect that is not covered by the Warranty (e.g. in the case that the Warranty
Conditions were not fulfilled or in the case of reporting the defect by mistake etc.), the Seller is eligible to
require a compensation for all the costs arising from the repair. The cost shall be calculated according to the
valid price list of services and transport costs.

If the Seller finds out (by testing) that the product is not damaged, the Warranty Claim is not accepted. The
Seller reserves the right to claim a compensation for costs arising from the false Warranty Claim.

In case the Buyer makes a claim about the Goods that is legally covered by the Warranty provided by the Seller,
the Seller shall fix the reported defects by means of repair or by the exchange of the damaged part or product for
a new one. Based on the agreement of the Buyer, the Seller has the right to exchange the defected Goods for a
fully compatible Goods of the same or better technical characteristics. The Seller is entitled to choose the form of
the Warranty Claim Procedures described in this paragraph.

The Seller shall settle the Warranty Claim within 30 days after the delivery of the defective Goods, unless a
longer period has been agreed upon. The day when the repaired or exchanged Goods is handed over to the Buyer
is considered to be the day of the Warranty Claim settlement. When the Seller is not able to settle the Warranty
Claim within the agreed period due to the specific nature of the Goods defect, he and the Buyer shall make an
agreement about an alternative solution. In case such agreement is not made, the Seller is obliged to provide the
Buyer with a financial compensation in the form of a refund.

SEVEN SPORT, s.r.o.

Borivojova 35/878 130 00 Praha 3, Czech Rebublic

CRN: 268 47 264, VAT ID: CZ26847264

Orders:

+420 556 300 970,

[email protected]

Warranty Claims:

+420 556 770 190, Mobile: +420 604 853 019,

[email protected]

Service:

+420 556 770 190, Mobile: +420 604 853 019,

[email protected]

Fax:

+420 556 770 192, (S420 556 770 191)

Web:

www.insportline.cz, www.worker.cz, www.worker-moto.cz

 

INSPORTLINE, s.r.o.

Bratislavska 36, 911 05 Trencin, Slovakia

CRN: 36311723, VAT ID: SK2020177082

Orders:

+421(0)326 526 701, +421(0)917 649 192,

[email protected]

Warranty Claims:

+421(0)326 526 701, +421(0)918 408 519,

[email protected]

Fax:

+421(0)326 526 705

Web:

www.insportline.sk, www.worker.sk, www.worker-moto.sk

Date of Sale:

Stamp and Signature of Seller: 

41

Содержание SPORTline EG-7820










































Отзывы: