Insportline SPORTline EG-7820, Руководство пользователя

Страница: 26 / 41

d. “ENTER” button: Press the “ENTER” button for confirming and entering the function value setting.
e. “UP” or “DOWN” button: Press the “UP” or “DOWN” button to choose P12 as the following
illustration shown.
f. “ENTER” button: Press the “ENTER” button to enter Program 12.
g. “UP” or “DOWN” button: Press the “UP” or “DOWN” button to choose the desired Watt Control
value (40 ~ 400 Watt; 10 Watt increment.)
h. “ENTER” button: To continue selecting other function values, press the “ENTER” button.
NOTE: The console will cycle through the functions as follow and allow users to set the function
values.
TIME (01:00 to 99:00; 1minute increment)  DISTANCE (0.1 to 99.9km; 0.1km increment) 
CALORIES (10 to 990 Kcal; 10 Kcal Increment)  PULSE (70 to 240 BPM; 1BPM increment)

Press the “ENTER” button to confirm the function value and enter the next function value
setting.

To increase or decrease the value of the function (“TIME”, “DISTANCE”, “CALORIES”,
“PULSE”) press the “UP” or “DOWN” button.

To reset the function value to zero, press the “RESET” button.
i. START/PAUSE” button: After setting up all the function values, press the START/PAUSE” button to
start a workout.

Under PAUSE or START mode, the user could press the “UP” or “DOWN” button to adjust the desired
Watt value (40 ~ 400Watt.)
WITHOUT PULSE VALUE:
“ ” flashing symbol will appear when detecting your pulse.
THE WARNING BEEP SOUND EMIT CONSTANLY DURING WORKOUT:
If your pulse is greater than the SELECTED PULSE VALUE during workout, the short
warning beep sound will constantly emit.
Please note that this is a warning for you to slow down or to decrease the workload level.
USER MODE
There are three ways to enter into USER MODE as below:
1. POWER OFF STATUS (LCD diagram disappear on LCD window):
a. Pedaling to activate the console.
b. The activated LCD console lights up along with a long beep sound. LCD diagram appears as shown
below:
26