Insportline IN 8236 DAXOS, Руководство пользователя

Страница: 7 / 12

7
ASSEMBLY STEPS
STEP 1
Attach the front (16) and rear feet (12) to the frame using the nuts (8), washer (9) and bolts (10).
STEP 2
Attach the handlebar post (23) inserting into the head tube on the frame. Using knob to adjust and tighten the
height in proper position. Then attached handlebar slider (21) on the handlebar post (23), use release lever (22)
to adjust and tighten the handlebar in proper position.
STEP 3
Insert the seat post (42) into the frame’s seat tube. Fit the saddle (1) into Seat slider (41) and tighten the nuts on
the bracket securely. Insert the seat slider (41) into the seat post (42) and fix. Using knob ( 4 ) adjusts and
tightens the height in proper position.
STEP 4
Attach the pedals (11) into the crank arms (5)(7), each pedal is marked with the L (left) or R (right) to denote the
side of the spinning bike they are on, Note: the right hand crank is on the same side as the chain guard (24). Be
careful to align the threads correctly to avoid any damage. A little grease on the threads should help the pedals to
screw in easily and correctly, tighten using a 15mm spanner; both pedals threads should tighten towards the front
of the spinning bike.