8
ADJUSTING THE RESISTANCE
To adjust the exercising resistance on the complete spinning bike by the brake knob (31) of brake system, and
then simply loosen (-) or tighten (+).
The flywheel should rotate freely without resistance when you loosen (-) the brake system totally.
More experienced riders may wish to increase the overall resistance by tighten (+) the brake system totally.
USAGE INSTRUCTIONS
1)
The model has a fixed wheel driven flywheel and should only be used under professional supervision.
2)
Installation: It is important that the bike is correctly assembled and we recommend that suitably
qualified personnel carry out installation and assembly.
3)
It is important that the handlebar and seat are set at the correct height for your body. Make sure it is
securely tightened and that there is no lateral or vertical movement. Ask your instructor for assistance.
HANDLEBAR ADJUSTMENT
a)
Adjusting height: Undo the knob that is located where the handlebar post fits into the frame. Slide
the handlebar post up or down to the required height and retighten the knob.
b)
Adjusting forwards or backwards: Undo the release lever located below the handlebar slider.
Slide the handlebar assembly forwards until you reach the required position. Then securely re-
tighten the Release lever.
SEAT ADJUSTMENT
a)
Adjusting height: Undo the knob located where the seat post fits into the frame. Then retighten the
knob. Make sure it is tight enough to prevent the seat from twisting side to side.
b)
Adjusting forwards or backwards: Undo the knob located directly side of the seat slider. Loosen
the knob then slide the seat to the required position. Then make sure the knob retighten.
4)
Pedals and toe straps: Your feet should be securely positioned in the toe clips during the exercise. Put
your foot as far forwards as you can into the toe-clip and then pull the strap tight.
5)
The bike should operate on a level surface with no lateral movement. There is height adjuster pads
located on either side underneath the foot tube. Turn these pads clockwise or anti-clockwise until the
bike is totally stable on the ground.
6)
Movement: The bike is equipped with moving wheels, to make it easier to move. The moving wheels
located at the front of your bike make it easier to move it into a chosen position, by lifting the rear of
the bike up slightly and pushing it.
7)
Emergency brake: Press down brake system (31) for stop.
8)
The magnetic holder installs: The bike is assembled with high gausses of magnetic force. When
assembled should avoid the bike close to the household appliances articles and iron material part which
easy to be absorbed by the magnetic force. Ensure that an area of 2000 x 1000 mm behind the exercise
bike is free from any obstacles
Содержание IN 8236 DAXOS
Страница 1: ...1 USER MANUAL EN IN 8236 Exercise Bike inSPORTline Daxos...
Страница 4: ...4 EXPLODED DRAWING...
Страница 12: ...12 Date of Sale Stamp and Signature of Seller...
