8
10.
Mode/Spiral Vibration Time Display Window:
Display Spiral Vibration Time. Or display mode with
“9” together. Preset time is from 0 to 20 minutes.
11.
Seesaw Vibration Speed Display Window:
Display from H00 to H60.Thereinto, When display H00,
The Seesaw Vibration Mode will not work, H60 is the highest speed.
12.
Spiral Vibration Speed Display Window:
Display from L00 to L60.Thereinto, When display L00,
The Spiral Vibration Mode will not work, L60 is the highest speed.
13.
On/Off Button:
Press this button, the displaying mode will be working. Press again, the working mode
will be stop.
14.
Seesaw Vibration Mode Time/Speed “+” button:
Increase Seesaw Vibration time when displaying
time mode. Increase seesaw vibration speed when on manual program.
15.
Seesaw Vibration Mode Time/Speed “-” button:
Decrease Seesaw Vibration time when displaying
time mode. Decrease seesaw vibration speed when on manual program.
16.
Spiral Vibration Mode Time/Speed “+” button:
Increase Spiral Vibration time when displaying time
mode. Increase spiral vibration speed when on manual program.
17.
Spiral Vibration Mode Time/Speed “-”button:
Decrease Spiral Vibration time when displaying time
mode. Decrease spiral vibration speed when on manual program.
18.
Time/Speed “+” button:
Increase two Vibration time when display time mode. Increase two vibration
speed when display speed mode.
19.
Time/Speed “-” button:
Decrease two Vibration time when display time mode. Decrease two vibration
speed when display speed mode.
20.
Mode/Time Change Button:
Press this button, windows “9” and “10” will display mode. Press again,
windows “9” and “10” will display time.
21.
Program Button:
Press this button can change Programs – Auto program (P1, P2, P3) and manual
program without USB flash disk insert. Press this button will change user’s program (U1, U2, U3, U4,
U5, U6) with USB flash disk insert.
22.
Time Button:
Adjust vibration time when the machine is not working and on manual mode.
PROGRAMS
PRESET PROGRAMS
There are 3 preset manual programs. Each manual program works for 10 minutes.
Below shows manual program:
P1:
Spiral Vibration: 30
、
34…54
、
58
、
54… 6
、
2
、
6…22
、
26
Seesaw Vibration: 30
、
26… 6
、
2
、
6…54
、
58
、
54…38
、
34
Two vibration modes work together, the speed changes one time per five seconds.
P2:
Spiral Vibration: 2
、
40…40
、
2
、
40…
Seesaw Vibration: 40
、
2… 2
、
40
、
2…
Two vibration modes work together, the speed changes one time per fine minutes.
P3:
Spiral Vibration: (Seesaw Vibration does not work): 5,10,15…50,55,60…10,5
Seesaw Vibration: (Spiral Vibration does not work): 5,10,15…50,55,60…10,5
The speed changes one time per two seconds.
USER PROGRAMS
Users can define the program in USB flash disk which affiliated with the machine.
Operation Instruction as below!
1.
Open the reset interface by Double Click BOCH-USB-DUL under BOCH-USB in USB Flash Disk