9
2.
You can choose U1 – U6 by Clicking User’s Define Program.
3.
Fill in the data what you want it to be for spiral vibration and Seesaw vibration separately. Thereinto,
there is 12 speed data in upper line
（
Speed Range:0-60speed
），
In the lower line, it is the time
correspond to the speed(1 – 60 seconds).Attention that when the value of the speed is 0, the
corresponding vibration mode will not be work.
4.
When you choose “ONCE” button after you reset the 12 sets of data, the corresponding vibration mode
will be only running once(The whole vibration time is the amount of the 12 sets data).When you choose
“LOOP” button and fill running time(1-12 minutes). It will run for several times of these 12 sets data.
The running time is running time which you filled by the amount of 12 sets data.
5.
After you amend the data you will see the change of RUNNING COLUMN changed. The height of the
column indicate the speed, the width of the column indicate the time.
6.
Function Buttons access data file. “Load Factory” button resumption factory data. “Load Default”
button load the data what you set and display on the window. Save Default” button save the data and
will be active which you set. After you insert USB flash disk, the machine will work according to the
data which you set. “Save” button will only save the data but do not active them. “Load” button load the
data which saved and will display on the window, then, Press “save Default” button will complete the
reset of the user’s program.
PULSE METER
Hold on metal sheet on the handrail when the machine is stop. The pulse light will be flickering according to the
pulse of your body and will display ECG-P085. The last three words are the pulse of user’s body.
If the pulse light does not flickering, please check if the metal sheet is clean and dry.
FEATURES
3 DIFFERENT PRESET PROGRAMS
Choose from 3 preset programs, each stimulating different terrain profiles with different level:
P1: Cardiovascular Exercise
P2: Detoxify Program
P3: Body Perfection Program
