Insportline IN 2207, Руководство пользователя

Страница: 70 / 73

TROUBLE SHOOTING GUIDE
3. Verify that all the bolts and nuts are locked properly and the turning parts should be
turned freely without damaged parts.
4. Clean the equipment with soap and slightly damp cloth only. Please do not use any
solvent to clean the equipment.
Problem Potential Cause Corrections
Base is unstable. 3. Floor is not flat or there is
small object under the front
or rear stabilizer.
4.
The rear stabilizer end caps
on the rear stabilizer have
not been leveled when
adjusting.
3. Remove the object.
4.
Adjust the rear stabilizer end
caps.
Handlebar or seat
post is shaking. The bolts or seat post knob is
loose. Tighten the bolts or seat post
knob.
Loud noise from
the moving parts. The interval of the parts is
improper tighten. Open the covers to adjust.
No resistance
when riding the
upright bike. 5. The interval of the
magnetic resistance
increases.
6. Tension control knob is
damaged.
7. Belt slips.
8. The bearing set is damaged.
5. Open the covers to adjust.
6. Change the tension control
knob.
7. Open the covers to adjust.
8. Change the bearing set.