Insportline IN 21318, Руководство пользователя

Страница: 14 / 23

14
LUBRICATION NOTIFICATION
The treadmill automatically alerts the user. A warning is displayed after 300 km. The console will
sound a beep every 10 seconds and the OIL will be displayed. Read the user manual before
lubricating and then apply the lubricant to the center of the treadmill. After lubrication, press the STOP
button for 3 seconds to turn off the alarm and notification.
SAFETY KEY
If the safety key is removed during exercising, the treadmill will stop. The display shows --- together
with the beep. The treadmill will not work until the key is inserted again.
SAVING MODE
The belt is equipped with a power saving mode that starts after 10 minutes when the treadmill is not in
use. Console shuts down, press any button to wake up console,
TURNIN ON / OFF THE TREADMILL
Press the button to turn on / off the treadmill and .
WARNING
•
We recommend that you start exercising at a slower speed. Hold on to the handrails until you
are confident to start exercising on higher speeds.
•
Connect the safety key to the console and then to your clothes. In case of malfunction or
problems, pull out the key.
•
To stop safely, press the STOP button or remove the safety key.
MAINTENANCE GUIDE
General cleaning will help to prolong the life and improve performance on your treadmill. Keep the unit
clean and maintained by dusting the components on a regular basis, cleaning the two exposed sides
of the running belt to prevent dust from accumulating underneath the belt. Keep your running shoes
clean so that dirt from the shoes does not wear the running belt. Clean the surface of the running belt
using a clean damp cloth. Keep liquids away from electrical parts and running belt.
To prolong the lifespan of the treadmill it is recommended to turn it off every 2 hours of continues use
for at least 10 minutes.
A loose running belt will result in the runner sliding off when running, while too tight running belt will
result in decrease of the motors performance and will also create more friction between the roller and
running belt. The most suitable tightness for the belt is distance of 50-75mm from the running board.
ADJUSTING THE RUNNING BELT
Place the treadmill on level ground and set it at 3.5
– 5 km/h to check and see if the running belt (20)
drifts from the center.
If the running belt (20) drifts to the right, turn the
adjusting bolt on the right side
¼
turn clockwise,
then turn the left adjustment bolt ¼ turn counter-
clockwise. If the belt does not move, repeat this
step until it centers. Refer to image A.