Insportline Hodore ET, Руководство пользователя

Страница: 10 / 19

10
ASSEMBLY
STEP 1
Attach the stabilizing feet (71) to the front and rear stabilizer (7, 8).
STEP 2
Remove the two screws (19), the two washers (69) from the front stabilizer (7). Remove the two
screws (19), the two washers (69) from the rear stabilizer (8).
Attach the front stabilizer (7) to the main frame (1) using the two screws (19), the two washers (69)
that you removed.
Attach the rear stabilizer (8) to the main frame (1) using the two screws (19), the two washers (69) that
you removed.
STEP 3
Remove the six screws (19), the six washers (37) and the six large washers (65) from the main frame
(1).
Push the load adjustment cable (22) through the bottom of the middle post (2) and push it out through
the square. Connect the sensor cable II (72) from the main frame (1) to the sensor cable I (18) from
the middle post (2).
Insert the front column (2) into the main frame (1) and secure with six screws (19), six washers (37)
and six large washers (65). Tighten with Allen key S6.