Insportline Hodore ET, Руководство пользователя

Страница: 11 / 19

11
Remove the washer (23) and bolt (24) from the hand screw to adjust the load (21).
Pull the cable from the hand screw to adjust the load (21) to the load conditioning cable (22) as shown
in Fig. A. Pull and hook the cable as shown in fig. B. Attach the hand screw (21) to the front post (2)
using the washer (23) and screw (24) that you removed. Tighten with hexagonal bolt.
STEP 4
Remove the two screws (36), the two washers (37), the two large washers (38) and the two washers
(39) from the left and right sides of the middle post (2).
Attach the left handlebar (3) to the middle post (2) with the screw (36), washers (37, 38, 39).
Attach the bracket (60) to the left crank (82) using the bracket bolt (60), washers (61) and nut (57).
Attach the cap (56) to the screw (55).
NOTE : The screws for the left bracket (57) and for the right bracket (63) are marked R - right, L - left.
Attach the left footrest (48) to the left footrest bar (4) using the three nuts (33), three washers (51) and
three screws (50).
Attach the caps (42, 43) to the left footrest bar (4) with the two screws (29).
Repeat the procedure above for the right handles (5) and footrest (49).