background image

 

FRONT DROP 1 

1.  Start with a low basic bounce in the normal position. 

2.  Land on your hands and knees at the same time, make 

sure  your  back  is  horizontal  and  that  your  hands  and 
legs are shoulder width apart. 

3.  Maintain  strong  body  position  and  straighten  your  legs 

behind  you  and  fold  your  arms  in  front  of  your  face  in 
mid-air,  ready  to  land  on  the  mat  in  a  lying  down 
position. 

4.  Make  sure  the  landing  is  done  with  all  of  your  body 

touching  the  mat  at  same  time.  Push  off  your  hands 
back to the standing position. 

 

FRONT DROP 2 

1.  Start with a low basic bounce. 

2.  Maintain strong body position with your back horizontal, 

straighten  your  legs  behind  you  and  fold  your  arms  in 
front of your face in mid-air, ready to land on the mat in 
a  lying  down  position.  Ensure  the  landing  is  done  with 
all of your body touching the mat at the same time. 

3.  Push off your hands back to the standing position. 

 

Should you wish to progress any further and learn more advanced techniques for 

trampoline

please consult a qualified and registered instructor. 

TRAMPOLINE ASSEMBLY 

 

The trampoline can only be assembled by an adult. 

 

Two people are needed to assemble the trampoline. 

 

Trampoline should be assembled on grass or BSI approved safety matting. 

 

Please read the assembly instruction before beginning to assemble the product. 

 

PLEASE  REFER  TO  THE  TABLE  FOR  PART  DESCRIPTIONS  AND  NUMBERS.  THE 

ASSEMBLY  INSTRUCTIONS  USE  THESE  DESCRIPTIONS  AND  NUMBERS  AS 
REFERENCE. 

 

Make sure you have all the parts listed. If you are missing any parts, please contact the place 

of purchase. 

 

To assemble the trampoline, you’ll need a special loading tool provided with this product. 

 

Please use gloves to protect your hands from pinch points during assembly. When you 

are  ready  to  start,  make  sure  that  you  have  plenty  of  space  and  a  clean  dry  area  for 
assembly.

 

PARTS LIST 

 

Trampolines with three or four legs. 

 

Choose your trampoline size 

Содержание Froggy PRO



















Отзывы: