
VLF-3 Rev #1C Assembly Instructions
17
1g. Install the potentiometer and switches
From Bag #4, remove the two 10k pots (R7 and R26) and the four Double Pole Double Throw
(DPDT) slide switches.
Slide the three contacts for the pots through the holes provided from the switch side of
the PCB (non-component side). Push the switch firmly against the PCB and solder
either (or both) sides.
Insert the six contacts for each DPDT slide switch into position and press the switch
firmly against the switch side of the PCB. Solder each contact on the component side.
1h. Install the LEDs
Align the LED leads as shown with the
shorter lead closest to the line in the PCB
symbol. Either color can be used for LED1
and LED2 even though red is shown as
LED1 and green as LED2 on pages 9 and
13.
Insert the LEDs and place the PCB against
the face plate, letting it push the LEDs into
the PCB. Adjust until they only protrude
slightly above the surface of the face plate,
then solder in place to either side of the PCB.
Carefully trim the excess leads.
THIS COMPLETES THE INSTALLATION OF ALL PARTS ON THE PCB
Содержание VLF-3
Страница 8: ...VLF 3 Rev 1C Assembly Instructions 8...