Inspire M5, Руководство по сборке и эксплуатации

Страница: 18 / 32

Pulley 14
Pulley 15
Pulley 16
STEP 11
A) Insert the end of the Leg Extension Cable, from Step 10A, into the Floating Pulley Bracket
Assembly (20) as shown in the circle diagram, slide on the Cable Adapter (72), seat it in
the pulley bracket and install Pulley 14 with M10*45 bolt (94).
B) Now with Press Arm Middle Cable (42), take the end with the eyelet and bolt it to the Main
Frame with M10*25 bolt (108) and tighten the hardware now. Then route the cable under
Pulley 14 through the Floating Pulley Bracket and up the other side of the square post.
The Floating Pulley Bracket and Pulley 14 should now be positioned directly under the post
where the cable end is attached.
C) Attach Pulley 15 to the Floating Pulley Plates (28) with one M10*45 bolt and run the cable
over the top of the pulley and back down towards Pulley 16. At Pulley 16, you will first
need to finish the cable end as in Step A above and then install the pulley with one
M10*45 bolt.
PAGE 15
Floating Pulley
Bracket Assembly
has a plate on the
bottom
Cable Adapter
Press Arm Middle Cable
p/n 870-500-003