insize ISH-DSD, Руководство по эксплуатации

Страница: 4 / 10

2
2. Function
100
0.025
L
HD = -
The formula is as below:
relative HD means it is types D Shore Hardness.
According to this formula as above, the types D Shore hardness is
to the displacement of the pressed needle. Through measuring the
displacement of the pressed needle, the types D Shore Hardness
can be calculated.
1) Peak value latching, Average value calculation, Low-voltage alarming.
2) Auto power off.
In three minutes, if there isn't any operation, the durometer will be
auto power off. Automatically shut down before the buzzer rang five
times, to indicate that the machine will automatically shut down.
3) Large LCD
The high resolution industry class LCD is applied to this durometer.
These make it convenience to read.
4) Menu operation and management interface
The operation and management interface is menu type. It is easy to
learn and operate.
5) Fully data management
This durometer can storage, delete and print the test data. It also can
set an interval to sorting samples and accomplish the basic statistics
and calculations of the test data.
6) The content to be printed can be customized.
7) The large capacity rechargeable Ni-MH is built-in.
3. Application field
This durometer is mainly used to measure the hardness of hard rubber
and hard plastic, such as: thermoplastic, hard resin, flooring, bowing.
Especially for on-site hardness measurement of rubber and plastic
products.
15
2. Print report
There are several print modes built-in the durometer. You can select by
yourself.
3. Auto-print
There are several print modes built-in the durometer. You can select by
yourself.
1) Auto-print
The auto-print command will be carried out during measuring if this
function is set to on. The durometer will send the data to the thermal
print after the finishing of one statistic group.
2) Concentration print
The data can't be printed during measuring. You can print the data
There are two options under this mode: print selected data” later. “
all data” explained as above. and “print
Data storage
This durometer can storage 500 group data at most (one group data
include: one hardness value, the date/time/sample code). if 500 group
data have been saved; no more data can be saved. You need to delete
part or all data. If 500 group data have been saved, the screen will
display “M FULL” under the measuring interface.
Hardness testing
Please press the needle on the sample and make sure the presser foot
is contact closely to the sample. When the data is stable, the buzzer will
make a sound and the value will show until the next measuring.
Current measuring mode: maximum average
value mode
Current measured value: 58.1HD
Current statistic times: 5
The measured number: 2
Current average value: 57.8HD
Peak difference: 0.7HD
Multi-point measuring will be realized by
repeating above steps.
Fig 9-1