insize ISH-DSD, Руководство по эксплуатации

Страница: 3 / 10

1
Only authorized charger is allowed to be applied to this, otherwise
it will be damaged permanently.
1. Basic principle
Attention
Any part of this can't be immersed in the water or be exposed to the
rain, otherwise it will be damaged permanently.
SUMMARY
Origin package is need for long time storage.
Temperature: -30°C~+80°C
Relative Humidity: 5%~95%
The battery should be charged fully before first using.
By a given force, the standardized shaped steel needle is vertically
pressed into the sample. When the presser foot surface is contact the
sample surface, there is a length of L (Figure 3) which is between the
tip of the needle and presser foot surface. The value of L indicates the
value of Shore Hardness of the sample. Larger the value of L, smaller
the
Shore Hardness. Conversely, smaller the value of the L, sample's
Larger the sample's Shore Hardness.
This durometer should avoid shock or heavy pressure and can't
be exposed to high-intensity magnetic field, high humidity or oil
environment.
Because the print paper is heat sensitive paper, the paper should
avoid high temperature, and direct light. If the print data need to be
stored for long time, please make a copy in time.
When there are any abnormal phenomenons, please don't try to
disassemble or adjust any fixed part. You should fill the warranty
card and contact our maintenance department or maintenance agency
authorized by our company. Normally, the durometer will
not stay in
the maintenance department over one week.