Insinger GS 302, Техническое руководство

Страница: 13 / 47

Undercounter DOC GS 302 1.0 05 www.insingermachine.com 800-344-4802
Note
:The first run of each day OR after
the machine is drained will be delayed due
to the manner in which the GS 302 is filled.
;
11
Changing the Detergent Type.
If changing to a different detergent type (even one
by the same manufacturer), you must rinse the
suction and pressure hoses with fresh water before
connecting the new detergent container. Otherwise,
the mixing of different types of detergent will cause
crystallization, which may result in a breakdown of
the dosing pump.
Check the amount of detergent and
rinse aid when the symbol DOS (D)
lights up on the operating panel.
To do this pull the lower panel forwards.
The program button (3) is lit green
when the tank and booster have
reached their target temperatures
.
The machine is now ready for operation.
The tank is filled in stages through the pressureless
booster. The booster fills and heats the water.
One the water reached approximately 150 °F, the
water is transferred into the wash tank by way of
the rinse pump. This process continues until the
wash tank is filled and heated to target values.
Push the full wash rack into the ma-
chine and close the door.
Press program button (3). The pro-
gram button is lit
blue while the cycle
is running.
The program button lights up green
when the cycle is complete.
Open the door and remove the wash
rack. The intrinsic heat of the wares
and the effect of the rinse aid added to
the rinsing water combine to quickly
dry the wares. Do not dry recently
cleaned dishes with a towel to avoid
spreading bacteria and germs.
Close the door.
Washing with the Normal Program
;
NOTE:
The storage tanks are identified with words
“
detergent ” and “ rinse aid ”. When filling, make
sure that no detergent goes into the rinse aid
container or vice versa.
WASHING
Washing with the Extended Program
Press the function button to activate
the area with the extended program.
Press the button again to deactivate
this area.
The extended program can now be used in addition
to the normal program. This means that once the
extended program has been selected, it will always
be activated by pressing button 3. To clear the ex-
tended program press button 4 again. If switched
off the machine will revert to the normal program.
PART 3 OPERATING INSTRUCTIONS
®
3 4