Insinger ADMIRAL 44 ADVANCED, Техническое руководство

Страница: 18 / 39

Document: 9700 - 03499 Rev B 18 www.insingermachine.com 800 - 344 -
DAILY CLEANING PROCEDURES
1. Remove all internal removable parts including
spray manifolds, scrap screens, drain overflow ,
suction strainers and curtains.
2. Remove the end caps from the spray manifolds
and clean with the brush provided. Flush the
manifolds.
3. Flush scrap screens.
4. Clean drain overflow tube.
PART 4 CLEANING INSTRUCTIONS

NOTE:
Improper cleaning of the suction strainers will
cause the pumps to cavitate. This will cause
poor washing results.
5. Clean the suction strainers of build - up.
6. Clean the tank level cup with a plastic abrasive
pad (do not use steel wool).
7. Clean curtains. When the curtains are beyond
cleaning or torn they should be replaced.
8. Clean final rinse nozzles of matter clogging the
jet spray.
9. Leave the doors open to allow the drying of the
interior surfaces.
The following cleaning procedures should be done daily, at the end of the shift.
WEEKLY CLEANING PROCEDURES
An DELIME switch is provided on the control panel.
Switch has three horizontal bars and is right of
power switch. Pressing the DELIME switch will start
the delime cycle. The LED ’ s will be cyan in color.
Consult your detergent supplier for de - liming solu-
tion concentration and frequency of use.

NOTE:
V - cup seal on the drain overflow may
become gummed not allowing the overflow
tube to seal. This will cause the drain to leak
water. Remove any build - up on the V - cup
seal. When the seal becomes worn, replace
with part # 4025 - 01541.

NOTE:
Level cup must be cleaned daily. Build - up of
grease and dirt will cause faulty operation of
the tank fill heating system.
The LIQUID LEVEL CUP is located below the scrap
screens in those tanks which contain water heating
devices (coils, steam injectors, or electric immer-
sion heaters) and pump inlet strainers. They are
usually located, in rackless and rack conveyor style
machines, on the inside tank wall opposite and par-
allel to the inspection doors