Insinger ADMIRAL 44 ADVANCED, Техническое руководство

Страница: 15 / 39

Document: 9700 - 03499 Rev B 15 www.insingermachine.com 800 - 344 -
CAUTION:
As with any 3 phase system, an electrician must check all motors for proper phasing,
i.e., pump motors must be running in direction indicated by arrow on housing.
INSTALLATION INSTRUCTIONS
Placement
Carefully uncrate machine. Take caution not to
damage components which may be mounted on
the top or sides of the machine. Set unit in place
and adjust the feet to level the machine.
Fasten the tables to the load and unload side of the
machine. Most installations require fastening the
turn - down lip of the dish table to the side of the
machine with flathead counter - sunk screws. The
table design should provide horizontal clearance of
30” for servicing underneath the table.
Electrical Connections
Connect electrical lines sized for the correct volt-
age, current and phase of the machine. These
should agree with the machine requirements
indicated on the nameplate and labels on the
control panel.
On machines not provided with a single - point con-
nection (optional) there is an electrical connection
required for the: 1. Pumps and control circuit, 2.
Wash tank heater(s) and, 3. Rinse tank heaters
(if provided).
If an external electric booster is provided, connect
power directly to the booster.
Fusing must be in accordance with the Fuse Sizing
Chart on specification sheet.
PART 2 INSTALLATION INSTRUCTIONS
CAUTION:
Connections must be made to a circuit breaker
or fused disconnect as provided by the
end - user and required by local codes.
A laminated wiring diagram is inside the control panel.