
43
4-Burner Electric Range
www.insigniaproducts.com
Surface units do not work
There has been a main power supply
surge and/or a power interruption and
surge.
On the Control Panel, activate the Self Clean
mode (press the
SELF CLEAN
button)
Wait for 30 seconds and then press the OFF
button.
The cooktop should now be ready to operate.
The words “CLOSE DOOR” flashes or
scrolls in the display
This is a normal condition. The “CLOSE
DOOR” is a reminder message to keep
the oven door closed during broil
mode.
This is normal. Keep oven door closed during
broil mode.
Oven temperature too hot or too
cold
Oven thermostat needs adjustment.
See the Adjust the oven thermostat–Easy to do
yourself! section.
Clock and timer do not work
Plug on range is not completely
inserted in the electrical outlet.
Make sure electrical plug is plugged into a live,
properly grounded outlet.
A fuse in your home may be blown or
the circuit breaker tripped.
Replace fuse or reset circuit breaker.
Oven controls improperly set.
See the Using the clock, timer and convenience
outlet section.
Display goes blank
A fuse in your home may be blown or
the circuit breaker tripped.
Replace fuse or reset circuit breaker.
The clock is turned off from showing in
the display.
See the Using the clock, timer and convenience
outlet section.
Oven door is crooked
The door is out of position.
Because the oven door is removable, it
sometimes gets out of position during
installation. To straighten the door, push down
on the high corner.
Oven makes clicking noise
This is the sound of the heating
element turning off and on during
cooking functions.
This is normal.
“F” and a number or letter flash in
the display
You have a function error code.
Press the
OFF
pad. Put the oven back into
operation.
If the function code repeats:
Disconnect all power to the range for at least 30
seconds and then reconnect power. If the
function error code repeats, call for service.
On self-cleaning models, if a function error code
appears during the self-cleaning cycle, check
the oven door latch. The latch may have been
moved, if only slightly, from the locked
position. Make sure the latch is moved to the
right as far as it will go. Press the OFF pad.
Allow the oven to cool for one hour. Put the
oven back into operation.
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
NS-RNE4BWH8-C_17-0680_User MAN_V2_ENG.fm Page 43 Monday, September 18, 2017 1:12 PM