
15
4-Burner Electric Range
www.insigniaproducts.com
#
ITEM
FUNCTION
1
Bake
pad/light
Touch this pad to select the bake function.
Flashes while in edit mode–you can change the oven temperature at this point. Glows
when the oven is in bake mode.
2
Start/on
Pad
Must be touched to start any cooking or cleaning function.
3
Display
Shows the time of day, oven temperature, whether the oven is in the bake, broil or
self-cleaning mode and the times set for the timer or automatic oven operations. The
display will show
PRE
while preheating. When the oven reaches the selected
temperature, the oven control will beep and the display will show the oven
temperature.
If “F– and a number or letter” flash in the display and the oven control signals, this
indicates a function error code.
If your oven was set for a timed oven operation and a power outage occurred, the clock
and all programmed functions must be reset.
The time of day will flash in the display when there has been a power outage. Reset the
clock.
If the function error code appears during the self-cleaning cycle, check the oven door
latch. The latch handle may have been moved, even if only slightly, from the latched
position. Make sure the latch is moved to the right as far as it will go.
Touch the OFF pad.
Allow the oven to cool for one hour. Put the oven back into
operation. If the function error code repeats, disconnect the power to the range and call
for service.
4
Timer
Pad/light
Touch this pad to select the timer feature. Then touch the
+
and
–
pads to adjust the
timer.
Flashes while in edit mode–you can change the set time at this point. Glows when the
timer has been activated. Flashes again when the time has run out until the control is
reset.
5
Clock
Pad
To set the clock, press this pad twice and then press the
+
and
–
pads. The time of day
will flash in the display when the oven is first turned on.
6
Broil
Pad/light
Touch this pad to select the broil function.
Flashes while in edit mode–you can switch from
HI
to
LO BROIL
at this point. Glows
when the oven is in broil mode.
7
Off
Pad
Touch this pad to cancel
ALL
oven operations except the clock and timer.
8
Clean
Pad (on some
models)
Steam Clean
pad
Clean
Light
Touch this pad for easier cleaning of light soiling off the oven cavity or door. See using
steam clean section.
Touch this pad to select the self-cleaning function. See the
Using the self-cleaning oven
section.
Flashes while in edit mode–you can change the length of time for the self-clean cycle
at this point. Glows when the oven is in the self-clean cycle. After the self-clean cycle,
the light will turn off. Unlatch the door.
9
+ Pad
Short taps to this pad will increase the time or temperature by small amounts. Touch
and hold the pad to increase the time or temperature by larger amounts.
10
– Pad
Short taps to this pad will decrease the time or temperature by small amounts. Touch
and hold the pad to decrease the time or temperature by larger amounts.
11
Oven light
or Pad
Touch this pad to turn the oven light on or off.
NS-RNE4BWH8-C_17-0680_User MAN_V2_ENG.fm Page 15 Monday, September 18, 2017 1:12 PM