56
NS-42E760A12 Insignia 42" LED-LCD HDTV, 1080p
www.insigniaproducts.com
4
Press the button you want to remove the
buttonmoved data from twice. The LED blinks
twice.
5
Repeat Steps 1-4 for additional buttons you
want to remove.
Programming macros
Your Insignia universal remote control includes the
ability to program any button (other than the
SET
button) with a macro function. Each one can be set
up to perform a pre-programmed set of sequential
button presses with the press of a single button. A
macro can be used to control a home theater
operation, to set a favorite channel, or for other
functions you would like to control with one button
press. Each macro button can hold up to 15 button
presses, total.
To program a mode-independent macro:
1
Press and hold
SET
until the red LED blinks
twice, then release.
2
Press
9 9 5
. The LED blinks twice.
3
Press the button you want to assign to a macro.
4
Enter the series of commands you want the
macro to execute (up to 15 commands).
5
Press and hold
SET
until the red LED blinks
twice, then release.
Now, when you press the preset macro button, the
remote sends the series of commands you have
entered, regardless of what mode you are in. For
example, you could program a macro button to
turn on both your TV and cable box and select a
particular channel.
To program a mode-dependent macro:
1
Press the device mode button (
TV
,
DVD
,
STB
, or
AUX
).
2
Press and hold
SET
until the LED blinks twice,
then release.
3
Press
9 7 8
. The LED blinks twice.
4
Press the button you want to assign to a macro.
5
Enter the series of commands you want the
macro to execute (up to 15 commands).
6
Press and hold
SET
until the red LED blinks
twice, then release.
When you press the macro button, the remote
sends the series of commands you have
entered, but only if you are in the mode you
selected in Step 1. For example, you could
program the macro button to turn on both your
TV and cable box and select a particular
channel, but only if you are in TV mode. If you
are in DVD mode, this button does not execute
the macro you set up in TV mode.
Note
Programming a new macro over an existing one
erases the original macro.
Note
To clear the macro, repeat Steps 1-5, but do not enter
a series of commands at Step 4.
Note
To clear the macro, repeat Steps 1-6, but do not enter
a series of commands at Step 5.
