13
Insignia 42" LED-LCD HDTV, 1080p
www.insigniaproducts.com
Using DVI (same as HDMI but requires a sound
connection)
To connect a cable or satellite box using DVI:
1
Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2
Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable box.
3
Connect an HDMI-DVI adapter (not included) to
one end of an HDMI cable (not included).
4
Connect the HDMI-DVI adapter to the
DVI OUT
jack on the cable or satellite box, then connect
the other end of the cable to the
HDMI 1
jack on
the back of your TV.
.
5
Connect a 3.5 mm audio cable (not included) to
the
PC/DVI AUDIO IN
jack on the back of your
TV and to the
AUDIO OUT
jack on the cable or
satellite box.
6
Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7
Go through the setup wizard on page 22.
Using component video (better)
To connect a cable or satellite box using
component video:
1
Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2
Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable box.
3
Connect a component video cable (included) to
the
Y-VIDEO
,
P
B
, and
P
R
jacks on the side of
your TV and the component video out jacks on
the cable or satellite box.
4
Connect an audio cable (included) to the
L
and
R
audio jacks on the side of your TV and to the
audio out jack on the cable or satellite TV box.
5
Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6
Go through the setup wizard on page 22.
Note
A DVI device must be connected to the
HDMI 1
jack.
If you connect a DVI device to another
HDMI
jack,
you will not hear audio.
Note
When you connect the audio using the
PC/DVI
AUDIO IN
jack, the audio output is analog.
AUDIO OUT
DIGITAL
OUTPUT
ANT /CABLE
VGA
PC / DVI
AUDIO IN
HDMI 1 / DVI
HDMI 2
(ARC)
AUDIO OUT
DIGITAL
OUTPUT
ANT /CABLE
VGA
HDMI 2
(ARC)
Cable or satellite box
HDM
I c
able
wi
th
HDM
I-
DV
I ada
pt
er
3.
5 m
m
audi
o c
able
Back of TV
Note
When you connect the audio using the
L
and
R
audio
jacks, the audio output is analog.
You can connect the video to the component video
jacks and connect the audio to the digital audio jack
to get digital audio output.
Side of TV
Co
m
po
ne
nt
v
id
eo
ca
bl
e
Cable or satellite box
Audi
o cab
le