14
NS-42E760A12 Insignia 42" LED-LCD HDTV, 1080p
www.insigniaproducts.com
Using composite video (good)
To connect a cable or satellite box using
composite video:
1
Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2
Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable box.
3
Connect an A/V cable (not included) to the
Y-VIDEO
and
L
/
R
(audio in)
jacks on the side of
your TV and to the composite video and audio
out jacks on the cable or satellite box.
4
Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5
Go through the setup wizard on page 22.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1
Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2
Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3
Connect a coaxial cable (not included) to the
ANT/CABLE
jack on the back of your TV and to
the coaxial out jack on the cable or satellite box.
4
Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5
Go through the setup wizard on page 22.
Side of TV
Cable or satellite box
A/V cable
Cables are often color-coded
to match color-coded jacks.
Note:
The yellow connector
on the AV cable plugs into the
green
Y-VIDEO
jack.
Notes
•
Use a coaxial cable to eliminate interference and
noise from radio waves.
•
Do not bundle the coaxial cable with the power
cord or other cables.
AUDIO OUT
DIGITAL
OUTPUT
ANT /CABLE
VGA
PC / DVI
AUDIO IN
HDMI 1 / DVI
HDMI 2
(ARC)
AUDIO OUT
DIGITAL
OUTPUT
VGA
PC / DVI
AUDIO IN
HDMI 1 / DVI
HDMI 2
(ARC)
Cable or satellite box
Back of TV
Coaxial cable