19
Insignia 32" LCD TV/DVD Combo
www.insigniaproducts.com
B.
If you select
Cable
, a message asks if you have
a cable box.
• Select
No
if no cable box is connected.
Your TV scans for available channels. The
scan may take several minutes.
• Select
Yes
if a cable box is connected. A
message asks how you connected the
cable box to your TV.
• Select
AV
,
Component
, or
HDMI
if you
connected a cable box to your TV using
one of these cables. Read the message,
then press
OK
to close the wizard.
• Select
Coaxial
if you connected a cable
box to your TV using a coaxial cable.
Read the message, then press
OK
to
start the channel scan (VHF channels
only).
C.
If you select
Satellite Box
, a message asks
how you connected the satellite box to your
TV.
• Select
AV
,
Component
, or
HDMI
if you
connected a satellite box to your TV using
one of these cables. Read the message,
then press
OK
to close the wizard.
• Select
Coaxial
if you connected a satellite
box to your TV using a coaxial cable. Read
the message, then press
OK
to start the
channel scan (VHF channels only).
12
To watch TV, press
INPUT
, press
S
or
T
to
highlight the video input source for your
TV/DVD combo in the
INPUT SOURCE
list, then
press
OK
.
• If your TV/DVD combo is connected to an
antenna, cable TV (no box), or cable or satellite
TV box using a coaxial cable, select
TV
.
• If your TV/DVD combo is connected to a cable
or satellite box using an HDMI cable or HDMI
cable with a DVI adapter, select
HDMI 1
or
HDMI 2
.
• If your TV/DVD combo is connected to a cable
or satellite box using a component video
cable, select
Component
.
• If your TV/DVD combo is connected to a cable
or satellite box using a composite video cable,
select
AV
.
Understanding the basics
Turning your TV/DVD combo on or off
To turn your TV/DVD combo on or off:
1
Make sure that the power cord is connected to a
power outlet.
2
Press (power) to turn on your TV/DVD combo.
The power indicator turns blue.
3
Press (power) again to turn off your TV/DVD
combo. Your TV/DVD combo enters standby
mode, and the power indicator LED turns red.
Selecting the video input source
To select the video input source:
1
Turn on your TV/DVD combo, then press
INPUT
.
The
INPUT SOURCE
list opens.
2
Press
S
or
T
to select a video input source, then
press
OK
.
Do you have a Cable Box?
No
Yes
Move
OK
ENTER
MENU
EXIT
Exit
Previous
Se lec t
How did you connect the
AV, Component, or HDMI
Coaxial
Move
OK
ENTER
MENU
EXIT
Exit
Previous
Se lec t
cable box to the TV?
How did you connect the
AV, Component, or HDMI
Coaxial
Move
OK
ENTER
MENU
EXIT
Exit
Previous
Se lec t
satellite box to the TV?
Note
You can press
EXIT
to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
Warning
When your TV/DVD combo is in standby mode, it is
still receiving power. To completely disconnect
power, unplug the power cord.
Note
If your TV/DVD combo does not receive an input
signal for several minutes, it automatically goes into
standby mode.
TV
AV
HDMI 1
DVD
HDMI 2
USB
INPUT SOURCE
Component
VGA
