background image

 

www.insigniarange.com

 

Last Modified: 07/10/2015

 

 15 

Door Seals

 

Magnetic Seal: Push the magnetic door seal on the handle side of the glass door ensuring this is 

tightly fitted.

 

Rear Door Seal: Place the rear door seal on the opposite side to the magnetic strip ensuring the 

flap is facing the fixed glass panel

 

Hot Water Inlet

 

 

Cold Water Inlet

 

Open Outlet For               

Steam Generator

 

Shower Valve

 

 

Connect the corresponding hoses to the rear of the valve as shown.

 

Device output may differ from the image. Please refer to your outer chrome faceplate in-

side your Insignia shower as a reference point.

 

IF YOUR DIAL DOES NOT CORROSPOND TO THE APPROPRIATE DEVICE:

 

Turn on your water to the shower and note which output the water exits from then turn off 

the water and swap over the relevant hose.

 

Alternatively remove the outer chrome knob by removing the chrome cap and loosening 

the grub screw (please ensure not to unscrew fully as this will drop within the chrome 

knob)  this is found on the opposite side to the chrome pillar. Once you have succeeded in 

loosening this you can now slide your faceplate to correspond to the device.

 

 

Body Jets

 

Hand Shower

 

         Monsoon Shower

 

Содержание GT4000

























Отзывы: