www.insigniarange.com
Last Modified: 07/10/2015
11
Step 4
Run a bead of silicone along the bottom of the back panels and lock the back glass
panel to the completed front frame in the position shown in the image marked
“
1
”
Once you have met the back panel inside the front upright as per the close up image
walk the panel around to the position shown in the image marked
“
2
”
Now repeat for the other side
1
2
1
Step 5
Now you have locked the two back panels in position, align the back
panels to the central column. Once you are happy with the alignment,
apply silicone to the bottom of the centre column and screw all parts to-
gether using the
ST20
screws and
SW9
Washers as per the image.
Note: you may have a clear seal which sandwiches
between the column and backwall, ensure this is completely flat before
screwing the panels together.
(please note, if your column has a rubber seal at the bottom, take
the rubber off and apply silicone inside the rubber and replace)
